Return: Spa Care

Mineral Purification Stick

The Bullfrog Mineral Purifier naturally cleans your hot tub water and can is able to reduce the amount of chlorine or bromine you use by up to 50%. Reducing the amount of chlorine or bromine from your hot tub will reduce unpleasant odors, save money, and reduce dry skin.

As the mineral stick comes in contact with your hot tub water it uses a unique mixture of copper, silver, and zinc to kill bacteria. It also uses a charcoal (carbon) coating that that boosts the mineral stick ability to filter the gunk out of your spa.

Directions:


You’ll need:

  • Genuine Bullfrog Mineral Cartridge
  • Your choice of:
    • Bromine Tabs
    • Bromine Concentrate
    • Chlorine Concentrate
  • pH Increaser
  • pH Decreaser
  • Total Alkalinity Increaser
  • 4-Way Test Strips
  • System Flush
  • Bromine Tabs Floater (optional, if you opted to use Bromine Tabs)

Install the Bullfrog Mineral Cartridge

Bullfrog Spas 2017 & Newer:

  • Remove the filter cap to access the filter area
  • Unscrew the Filter Core cap to reveal the cartridge chamber
  • Place mineral cartridge into the cartridge chamber
  • Replace the Filter Core cap and cover
  • Place in the convenient chamber found in genuine Bullfrog Spa filter cores
  • Use a weekly dose of shock to activate minerals

Installation on all other Spas:

  • Place the Mineral Cartridge in your Hot Tubs Skimmer Basket or filter area so the water flows over it. Do not place the mineral stick inside of your filter standpipe to avoid getting it stuck.

Startup:

  1. Depending on your product choice:
    • If using Bromine Tabs, follow the label instructions on the floater
    • If using Bromine or Chlorine Concentrate, add 1 teaspoon per 200 gallons
  2. Wait 15 minutes and Test your spa water with your test strips
  3. Balance pH and Total Alkalinity accordingly

Bi-Weekly:

  1. Test your spa water with your test strips
  2. Balance Bromine or Chlorine, pH and Total Alkalinity accordingly
  3. Maintain at least 1 ppm or Chlorine or 2 ppm bromine residual

Weekly:

  1. Test your spa water with your 4-Way Test Strips
  2. Balance Bromine or Chlorine, pH and Total Alkalinity accordingly
  3. Maintain at least 1 ppm or Chlorine or 2 ppm bromine residual

Every 3-4 Months:

  1. Add System Flush to remove Biofilm and clean your pipe lines.
  2. Drain & refill
  3. Start all over