We've moved to a bigger location! Locate Us

Fun in the Sun.

January 12, 2017

How To: Clean Zeobrite

Zeobrite turns any sand filter into a super filter. Using an all-natural zeolite mineral, Zeobrite provides many valuable advantages over ordinary sand. Best of all, Zeobrite lasts just as long as sand. And when it’s finally time for replacement, all natural Zeobrite can be mixed into your garden soil, planter boxes or spread over your lawn as a natural soil enhancer. Each bag of Zeobrite is 100% natural zeolite of the highest quality commercially available.

  1. Turn the filter pump off and move your multi-port valve to “Backwash”.
  2. Remove the clear cover from your leaf strainer located on your pump.
  3. Turn the filter pump on and pour BioGuard’s Strip Kwik into the pump, allowing the cleaner to be sucked into the filter.
  4. Turn the filter pump off, move the multi-port valve to the “Closed” position and place the clear lid back on the leaf strainer pot.
  5. Allow the cleaner to soak in the filter over night.
  6. Move the multi-port valve to the “Backwash” position and turn the filter pump on.
  7. Backwash the filter until the water runs clear.
  8. Turn the filter pump off and move the multi-port valve to the “Rinse” position.
  9. Run the Rinse cycle for about 30 seconds.
  10. Turn the filter pump off and move the multi-port valve to the “Filter” position.
  11. Turn the filter on and operate as normal.